UV Resistant Stone & Masonry Sealer

KEY BENEFITS

• UV resistant
• Enhances natural appearance
• Helps prevent powdering
• Helps reduce dirt penetration
• Available in matt or gloss finishes
• Suitable for interior and exterior use

WHERE TO USE

• Slasto
• Rosestone
• Coloured stone
• Crazy paving
• Concrete surfaces
• Porous masonry surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dirt, grease or contamination
• Allow new surfaces to cure for at least 4 weeks before sealing
• Confirm substrate porosity before application

Moisture Test:
• Tape a clear plastic sheet to the surface overnight
• If the surface beneath appears darker the next day, allow additional drying time before sealing

Porosity Test:
• Apply droplets of water to the surface
• Immediate absorption indicates a suitable surface
• Water remaining after 2–3 minutes indicates an unsuitable surface

• Product is supplied ready to use — do not dilute
• Stir thoroughly before use

Horizontal Surfaces:
• Pour product onto the surface
• Spread evenly using a brush or applicator

Vertical Surfaces:
• Apply using a brush
• Work thoroughly into crevices
• Avoid pooling

• Apply second coat after the first coat has dried completely

Critical: Nova 02 Matt and Nova 02 Gloss are not compatible with one another and may not be applied over each other. Not suitable for slate, quarry tiles, terrazzo, ceramic tiles, glazed surfaces, non-porous surfaces or pool surrounds.

Tip: Always test a small area first to confirm absorption, finish appearance and compatibility before full application.

WHY CHOOSE

• Enhances natural stone appearance
• Helps protect porous surfaces against weather exposure
• Reduces dirt penetration and dusting
• Available in decorative matt or gloss finishes
• Easy long-term maintenance

KEY SPECIFICATIONS

• UV-resistant stone and masonry sealer
• Matt: Acrylic based
• Gloss: Oil based
• Coverage smooth surfaces: 6–8m²/L
• Coverage rough surfaces: 3–4m²/L
• Matt drying time: 20–30 minutes
• Gloss drying time: 2–3 hours
• Shelf life: 12 months

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N02GLO | N02MAT

The post Nova 2 Slasto & Stone Sealer appeared first on Genkem.

Decorative Slate & Quarry Tile Dressing

KEY BENEFITS

• Decorative wax dressing
• Restores natural appearance
• Enhances colour and texture
• Interior and exterior use
• Buffable sheen finish
• Easy maintenance system

WHERE TO USE

• Quarry tiles
• Black slate
• Coloured slate
• Marble
• Terracotta tiles
• Interior and exterior stone surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from contamination
• Remove old wax or coatings using Nova 10 Wax Remover or Nova 08 Novastrip where required
• Clean surfaces thoroughly using a hard bristle brush and diluted household detergent
• Rinse thoroughly and allow surfaces to dry completely
• Allow new surfaces to cure for at least 4 weeks before application
• Product is supplied ready to use — do not dilute
• Apply sparingly using a floor polish brush or cloth
• Rub thoroughly into the surface leaving only a light residual film
• Allow drying for approximately 3–5 hours
• Buff by hand or polishing machine to achieve the desired sheen finish

Optional Gloss Enhancement:
• For interior applications, apply Nova 13 Deepshine over Nova 03
• Allow approximately 20 minutes drying
• Buff to desired gloss level

Critical: Not suitable for slasto, highly porous surfaces, damp surfaces or previously sealed/waxed surfaces unless fully stripped. Nova 03 is not designed as a penetrating sealer system.

Tip: Apply thin coats sparingly for a more natural finish and easier buffing performance.

WHY CHOOSE

• Restores dull slate and quarry tile surfaces
• Decorative sheen finish enhances appearance
• Easy maintenance and reapplication
• Suitable for interior and exterior decorative use
• Controlled application for improved finish quality

KEY SPECIFICATIONS

• Solvent wax-based dressing
• Sheen finish
• Thick liquid consistency
• Drying time: 3–5 hours
• Coverage: approximately 20–30m²/L
• Shelf life: 12 months
• Cleaner: Nova 11 Brush Cleaner & Degreaser

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N03QUA

The post Nova 03 Slate ‘n Quarry Tile Dressing Sheen appeared first on Genkem.

Acrylic Concrete & Masonry Sealer

KEY BENEFITS

• Pure acrylic formulation
• UV resistant
• Non-yellowing
• Water repellent
• Helps resist staining
• Minimal darkening effect

WHERE TO USE

• Concrete floors
• Concrete walls
• Masonry and brickwork
• Limestone and sandstone
• Quarry tiles
• Garages, patios and pathways
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dirt, old sealers, polish or contamination
• Allow new tile adhesive installations to cure for at least 10 days
• Allow new cement installations to cure for at least 4–6 weeks
• Remove grout or cement residue using Tile Doctor Lift Off
• Neutralise surfaces using Genkem Super Power Clean
• Allow surfaces to dry completely before sealing

Moisture Test:
• Tape a clear plastic sheet to the floor overnight
• If a darker patch appears beneath the plastic, additional drying time is required

• Product is supplied ready to use — do not dilute
• Apply using a lambswool applicator only

IMPORTANT:
• Do NOT use roller application

• Apply thin even coats working along joint lines
• Avoid pooling, bubble formation and brushing over partially drying areas
• Additional coats may be applied after approximately 4 hours depending on porosity

Critical: Not suitable for damp surfaces, surfaces without damp proof membrane protection or hot surfaces during application. Do not apply below 5°C or if rain is expected within 48 hours on exterior surfaces.

Tip: Apply during cooler periods and avoid direct sunlight for improved penetration and more even drying performance.

WHY CHOOSE

• Penetrates and seals porous masonry surfaces
• Helps resist moisture and staining
• Maintains natural substrate appearance
• UV-resistant non-yellowing protection
• Suitable for interior and exterior use

KEY SPECIFICATIONS

• Pure acrylic sealer
• Water-based formula
• Coverage: approximately 8–10m²/L per coat
• Touch dry: 2–4 hours
• Recoat time: 4 hours
• Full cure: 72 hours
• Shelf life: 12 months

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N04CSS

The post Nova 04 Concrete & Masonry Sealer Natural Finish appeared first on Genkem.

Water-Based Paving & Masonry Sealer

KEY BENEFITS

• Water-based formulation
• Anti-fungal protection
• UV resistant
• Non-yellowing
• Preserves natural appearance
• Helps resist grease and oil penetration

WHERE TO USE

• Concrete paving
• Porous brick
• Unglazed tiles
• Masonry paving
• Walkways and patios
• Interior hard surface floors
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from contamination
• Remove oil and grease using Nova 11 Brush Cleaner & Degreaser
• Allow surfaces to dry thoroughly before sealing

Porosity Test:
• Apply droplets of water to the surface
• Immediate absorption indicates a suitable surface
• Water remaining after several minutes indicates an unsuitable surface

• Product is supplied ready to use — do not dilute
• Apply only to porous surfaces
• Apply in dry weather conditions
• Apply using:
  • Brush
  • Soft broom
• Work product thoroughly into the substrate while avoiding pooling
• • Apply 2–3 coats depending on porosity and sheen required
• • Allow coating to dry completely clear before recoating

Critical: Not suitable for pool surrounds, non-porous surfaces, wet surfaces or areas affected by severe rising damp. Do not allow pooling during application.

Tip: A damp proof membrane beneath exterior paving is strongly recommended to minimise rising damp and efflorescence-related failures.

WHY CHOOSE

• Helps protect paving against staining and dirt penetration
• UV-resistant non-yellowing finish
• Maintains natural paving appearance
• Anti-fungal protection for porous surfaces
• Easy low-maintenance sealing system

KEY SPECIFICATIONS

• Water-based acrylic sealer
• Clear sheen finish
• Coverage: approximately 7–10m²/L
• Touch dry: 3–5 hours
• Recoat time: 2–3 hours
• Light traffic: approximately 5 hours
• Full cure: 5–7 days

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N05PAV

The post Nova 05 Novapave Sheen Paving Sealer appeared first on Genkem.

Penetrating Marble & Stone Sealer

KEY BENEFITS

• Penetrating sealer technology
• Water repellent
• Stain resistant
• UV resistant
• Non-yellowing
• Helps maintain natural appearance

WHERE TO USE

• Polished marble
• Flamed and polished granite
• Travertine and limestone
• Porcelain and terrazzo
• Sanded grout and quarry tiles
• Kitchen counters, bathrooms and pool surrounds
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dirt, polish, sealers or contamination
• Neutralise surfaces using Genkem Super Power Clean where required
• Allow previously cleaned surfaces to dry for at least 24 hours before sealing

Moisture Test:
• Tape a clear plastic sheet to the surface overnight
• If a darker patch appears beneath the plastic, additional drying time is required

• Product is supplied ready to use — do not dilute
• Apply only to completely dry surfaces
• Apply using a clean absorbent cloth
• Wet the surface thoroughly and allow the sealer to remain wet for at least 1 minute before absorption
• Apply a second coat after approximately 4 hours where required
• Wipe away excess product after approximately 30 minutes

For Rapidly Absorbing Surfaces:
• Preseal using Tile Doctor Uro-Seal or Nova 04 Concrete & Masonry Sealer where required

Critical: Do not apply to damp surfaces, surfaces affected by rising damp, wood or plastics. Film-forming sealers must not be applied over Nova 06.

Tip: Protect adjacent glass and polished metal surfaces during application and ensure good ventilation throughout the sealing process.

WHY CHOOSE

• Penetrating non-film forming protection
• Helps resist water and staining without changing appearance
• Will not peel, blister or scratch like surface coatings
• Suitable for interior and exterior stone surfaces
• Helps reduce moisture-related biological growth

KEY SPECIFICATIONS

• Solvent-based penetrating sealer
• Clear non-yellowing finish
• Coverage: approximately 10–12m²/L
• Touch dry: 1–2 hours
• Foot traffic: approximately 4 hours
• Full chemical resistance: 7 days
• Shelf life: 12 months

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N06MGS

The post Nova 06 Marble & Granite Sealer Natural Finish appeared first on Genkem.

Weather Resistant Brick Dressing

KEY BENEFITS

• Weather resistant
• Water repellent
• Satin finish
• Enhances natural brick appearance
• Resists flaking, peeling and chalking
• Suitable for interior and exterior use

WHERE TO USE

• Facebrick
• Porous masonry
• Cement brick
• Terracotta
• Porous tiles
• Interior and exterior vertical walls
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dirt or loose contamination
• Remove contamination using a hard bristle brush or wire brush where required
• Allow new surfaces to cure for at least 4 weeks before application
• Confirm substrate porosity before use

Porosity Test:
• Apply droplets of water to the surface
• Immediate absorption indicates a suitable surface
• Water remaining after 2–3 minutes indicates an unsuitable surface

• Stir thoroughly before use
• Product is supplied ready to use — do not dilute
• Apply a thin even coat using a brush
• Work product thoroughly into the substrate
• Apply a second light coat after 24 hours if required

Critical: Not suitable for floors, patios, paving, horizontal surfaces, glazed brick, glazed tiles or damp surfaces. Do not apply to walls affected by reverse-side water penetration.

Tip: Always test a small area first to confirm substrate absorption and final appearance before full application.

WHY CHOOSE

• Enhances natural brick colour and appearance
• Helps protect porous masonry against weather exposure
• Penetrating low-build satin finish
• Suitable for long-term vertical surface protection
• Easy maintenance and reapplication

KEY SPECIFICATIONS

• Solvent-based synthetic resin dressing
•  Satin finish
• Coverage smooth brick: 4–8m²/L
• Coverage rough brick: 3–4m²/L
• Touch dry: 3–4 hours
• Recoat time: 24 hours
• Shelf life: 12 months

EASY TO CHOOSE. EASY TO USE. SINCE 1965.

N01BRI

The post Nova 01 Novabrik Satin Brick Dressing appeared first on Genkem.