Protective Automotive & Metal Coating

KEY BENEFITS

• Impact resistant
• Abrasion resistant
• Corrosion resistant
• Chemical resistant
• Brush or spray application
• Smooth or textured finish options

WHERE TO USE

• Vehicle underbodies
• Rocker panels
• Sills
• Mudguards
• Bumpers
• Trailers and industrial metal surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from dust, grease and loose rust
• Prime bare metal using a suitable self-etch primer
• Remove rust mechanically before coating rusted surfaces
• Abrade previously painted surfaces to a matte finish
• Stir thoroughly before use

Brush/Roller Application:
• Apply evenly for full coverage

Spray Application – Textured Finish:
• Use a 4mm bore gravity spray gun
• Apply at 3–4 bar pressure
• Hold approximately 500mm from the surface

Spray Application – Smooth Finish:
• Dilute with 15–20% water
• Use a 1.5mm bore spray gun
• Apply at 4–5 bar pressure
• Hold approximately 450–500mm from the surface

• Allow approximately 2 hours between coats
• Allow approximately 24 hours for full cure

Critical: Not suitable for continuous water immersion, wet surfaces, contaminated substrates or unprepared rusted surfaces.

Tip: Use textured application for underbody protection and smooth finishes where appearance is important.

WHY CHOOSE

• Designed for automotive protection
• Helps prevent corrosion damage
• Resistant to fuel and oil exposure
• Flexible application options
• Suitable for vehicle and industrial maintenance

KEY SPECIFICATIONS

• Water-based acrylic coating
• Available in standard colours
• Coverage: approximately 4m² per litre
• Touch dry (smooth): 3–4 hours
• Touch dry (textured): ±8 hours
• Full cure: ±24 hours
• Non-flammable

TRIED. TESTED. TRUSTED. SINCE 1939.

GIC

Available Colours:
Yellow, Red, Black, White, Grey

The post Genkem Impact Protective Coating appeared first on Genkem.